 |
The
display uses OLED(organic
light emitting diode).
OLED is an advanced
display which is self
light emissive, high
contrast, high response,
low power consumptive, and
large view angle. It uses
optimal technology for
instant readability
without afterimages of
flicker even when seen
from the passenger's seat.
|
|
Real-time
digital information
includes speed, oil
temperature, water
temperature, oil pressure,
fuel pressure and exhaust
temperature. Sensor sets
need to be purchased
separately to display the
information on pressures
and temperatures. |
|
Vehicle
performance data and peak
values are placed in
memory for 3 minutes,
allowing examination of
data after running the
vehicle.
*Defi-Link Control Unit II
has a 3 minute memory.
Defi-Link Control Unit has
a 40 second memory. |
|
When
the RPM signal wire is
connected to Defi-Link
Control Unit II or Defi-Link
Control Unit, 2 warning
levels can be set in
addition to the warning
setting made by Control
Unit II or Control Unit,
enabling the setting of a
total of 3 warning
levels(Tachometer Triple
Warning Mode). |
|
When
the water temperature
sensor is connected, the
warm-up condition can be
monitored. |
|
A
graphic animation plays
after the ignition is
turned on or off(Opening
Mode/Ending Mode). |
|
An
easily recognizable
graphic on each setting
screen helps guide easy
setting of warnings for
Defi-Link Meters and Step
Graph(Setting Assistance
function). |
|
The
Warning LED lights when
the set warning value is
exceeded for oil
temperature, water
temperature, exhaust
temperature and engine
RPM. The Warning LED
lights when measured value
drops below the set
warning value for oil
pressure and fuel
pressure. |
|
Trouble
locations are shown by
graphics so that
connection problems can be
quickly corrected(Self-Diagnosis
function). |
|
The
structure of the mounting
base allows height and
angle adjustment so that
it can match the shape of
the instrument panel. |
|
The
Defi-Link Indicator(sold
separately) can be
connected to the display. |
