Available for the following car makes:
Nissan Toyota Honda Subaru Mitsubishi Mazda
Power Enterprise Fueling Products
The most reliable & precise injectors, co-produced with DENSO, Exclusively offered by Power Enterprise and currently used by the WRC, Time Attack & JGTC. Made to the specific sizes from the molds, not honed to enlarge it. 
 
 
Power Enterprise is the largest Denso injector supplier in Japan

All Power injector's flow rates are calculated at 35.56 PSI (2.5kg/cm2) of fuel pressure. For any vehicle w/ fuel pressure of 42.67 PSI (3 kg/cm2) the flow rate will increase by ≒ 10%. lbs/h (91 octane at 65F temp.)≒ 10.25 CC/min 1psi ≒ 0.069 bar
 
POWER offers “top feed” and “side feed and the multi spray ports injectors. The 1 & 2 spray port patterns, depending on the engine's intake port system are POWER's unique designs. Multi spray port injectors are designed for higher level of combustion by avoiding atomized fuel hit on the wall of a intake port and flowing in droplets. The injector sprays fuel in 150-200 microns on the back of a valve head without hitting against the wall of a intake port. When the injector size becomes larger the mentioned problem become worse, but POWER developed unique two ports injectors to minimize the inefficiency for many of today's engine applications. The fact is when it's compared to the same amount of fuel passing through the POWER big injectors and the out put horse power for any engine, none of other injectors can compete.
 
POWER Hi-Flow Fuel Pump.
Power Enterprise High Flow Fuel Pump, the most reliable and popular among top tuners in Japanese race field. Please see the flow characteristics of 245L/H pump below if it's maching to your target HP (Fuel Consumption rate) . Minor modification required for installation.
165L/H (1820-PX165) 
245L/H (1820-PX245) 

Copyright © 2008 ST Wangan Sdn. Bhd. Powered by NexCom Solutions & Spyder-Net.com