Available for the following car makes and engines:
Nissan Toyota Honda Subaru Mitsubishi Mazda
NISSAN TURBO CHARGERS
 
Power Enterprise, the largest IHI turbo distributor in the world, co-engineered with IHI for the best matching twin turbo for the VQ35 engine’s characteristics. The specially developed turbo for the VQ35, the PE1420 has a flow rate of 600HP with twin and generating a powerful racecar like torque from lower RPM range makes your 350Z to be the fastest car out of corners at road courses. The Power Enterprise Z33 complete turbo kit includes the best efficiency calculated front mount intercooler, big capacity oil pan and upgrade fuel injectors. The twin turbo kit is suitable for 380HP(for stock engine) to over 600HP on a built engine. You will enjoy every step of tuning with the fastest spooling and toughest turbo kit in the market. Three different kit combinations are available for your needs, complete Kit, partial kit and base component kit.
 
They also developed a ball- bearing slanted flow turbine found to be the best matching with Silvia's engine character. Power Enterprise further researched and perfected a bolt on turbo kit that attains unprecedented crisper response.
*Power Enterprise Turbo Kit is available for Nissan Silvia 180SX, S13, S14 & S15 as well as Z32 and Z33 Fairlady*
TOYOTA TURBO CHARGERS
 
Designed for MR-2, fits without additional work (use stock　water/oil gasket. actuator is equipped as standard kit). MR-2/SW20 model kit is incorporated with the IHI turbine famed in Formula-One circuit, compact, durability, and the best performance in its size and class.
 
PE1215S, newly developed diagonal- flow turbocharger specially for the MR-S. Boosting commences at 1300rpm and reaches full boost of 0.45 kg.cm2 (6.35psi) at 2700rpm, enhancing the 1ZZ-FE7s power and torque. 6psi(200hp at 6300 RPM and 180 ft-lb at 3000 RPM) Without sacrificing engine's longevity, the PE1215S kit enhances MRS 1ZZ-FE engine's power and torque characteristics to its best performance. PE1215S turbo(IHI PE spec) charger, A/R of 15, has over 250HP flow capacity. It starts boosting at 1300 rpm and becomes full boost of 0.45kg.cm2 (6.35psi) at 2700rpm. Generating 70+ more HP on the stock 1ZZ-FE motor

*Power Enterprise Turbo Kit is available for Toyota MR-S and MR-2*
SUBARU TURBO CHARGERS
 
Applicable engine type: EJ20 & 25 (Subaru Impreza)
Power rating: 350WHP～550+WHP flow rates (varies by the combinations of exhaust. & compressor housings) Power Enterprise the largest IHI turbo distributor in the world newly released high demand RX6R KIT for Subaru Impreza EJ20- and EJ25 engine applications. The kit include RX6R turbo, which was #1 choice in F-1 racing circuit utilizing external waste gate system. The superior ball bearings firmly supports the turbine shaft in longitudal and axial directions for superior boost response at all RPM ranges due to non-exocentric spinning of blades. You can customize the kit from four different types of compressor housings and six types of exhaust housings to make the most suitable turbo kit for your target power. The kit adopts a 76.3mm large diameter front exhaust pipe, which designed to reduce exhaust gas backpressure. Another remarkable feature is to returning the exhaust gas out of the waste gate back into the front pipe, instead of releasing the gas directly into the atmosphere, to help reduces the noise and eliminates atmospheric pollutions without sacrificing performance. The exhaust manifolds are heat-treated for durability against cracks. The kit consists of RX6R turbine, Stainless steel ex-manifold, front pipe, external waste gate, oil lines, fasteners and Gaskets.
*Power Enterprise Turbo Kit and replacement turbos are available for Subaru GC8, GDA, GDB, STi*
MITSUBISHI TURBO CHARGERS

RX6R, a compact and light weight ball bearing turbine, known for the Formula-1 racing is now available through Power Enterprise, the largest IHI turbo distributor in the world. With engine internal upgrades, it can produce well over 600 wheel HP. The exhaust and compressor housings can separately be selected and matched for each engine specs. The 4G63 RX6R kit can be installed on the vehicle types CN9A / CP9A / CT9A with stock intercooler by fabricating your own inlet and intercooler piping. Large volume fuel pump and injectors are sold separately Setup Kit consist of RX6R turbo, Stainless EX manifold, Outlet pipe & Front pipe, Waste gate valve, Oil lines, Gasket set and hard wares.
Applicable Engines: 4G63(EVO4 - EVO9)

Power Capability: 450HP～650+HP(depending on the engine's strength upgrades)  
*Power Enterprise Turbo Kit is available for Mitsubishi Evolution CN9A/ CP9A/ CT9A*

Copyright © 2008 ST Wangan Sdn. Bhd. Powered by NexCom Solutions & Spyder-Net.com